I purchased a HP 5328a counter off ebay for a decent price. It arrived a few days later and I’d say cosmetically its a 9.9/10. After putting it on the bench and turning on the unit I released it didn’t have the oven based oscillator. It did have channel C option and GPIB interface. After checking channel A I was really glad to see that things were working correctly. I moved over to test channel C. All was well I thought until I noticed that the connector on channel C seems to work intermittanly. After pulling the cover off I was pleased to see the unit was very clean inside. I removed the channel C card by taking a single screw out from the rear to remove the top cover. Removing the BNC was just a simple process of removing the nut. After taking the connector apart it was tarnished quite a bit. Some cleaning and I did apply a bit of pressure. After assembly the C channel was working perfectly.