First Power Up of the VMC mill in the shop

First Power Up of the VMC mill in the shop

First power up of the Excel VMC CNC into the shop. Testing of the American Rotary three phase AD-20 converter with the Mill.

After verifying the three phase connection voltages and placing the high leg on non-control leg inputs of the machine I powered the machine on without issues. I did initial leveling using the bed with the center bed screws loose. All the rigging preventing table and Z axis movement was removed. I used simple green cleaner for most of the machine. The automatic tool changer area I used purple power. A fresh load of coolant will do the rest of the cleaning for me.

I did have an issue after startup with a servo drive alarm. It ended up being a fiber optic connector on the Fanuc controls. After reconnecting, everything worked fine.

Share with others!
Share on Facebook
Tweet about this on Twitter
Email this to someone
Digg this

Leave a Reply