www.shaneburrell.com Telecom – Electronics – HAM Radio – Test Equipment – Rescue

29Aug/170

FANUC OM CRT to LCD Conversion

FANUC OM CRT to LCD Conversion

Adjustment of the Fanuc OM 9" CRT and complete replacement to a color LCD.

Share with others!
Share on FacebookTweet about this on TwitterEmail this to someoneDigg this
18Jun/170

Fanuc Keysheet Replacement DIY HowTo

Fanuc Keysheet Replacement DIY HowTo

I have a Excel PMC 5V20 Vertical Machining Center with a Fanuc OM control. Keys below the CRT were busted and damaged. After purchasing a new keysheet, I verified fitment. The keysheets for the Fanuc are glued on and need to be removed and reapplied.

After cleaning the front of the Fanuc bezel, I replaced the keysheet and the control looks like brand new. In conclusion, I'm really happy with the results and the PCB board is again protected from coolant and other contaminates.

Share with others!
Share on FacebookTweet about this on TwitterEmail this to someoneDigg this
18Jun/170

Fanuc OM CNC Mill Positive Tool Offset / Gage Line Setup

Fanuc OM CNC Mill Positive Tool Offset / Gage Line Setup.

Setting up work and tool offsets using a gage line setup on a Fanuc OM control. This method uses positive tool offset based off the mill table of the VMC and the gage line of the tool spindle.

Share with others!
Share on FacebookTweet about this on TwitterEmail this to someoneDigg this
6Jun/170

Proofing CAM to DNC to CNC Mill.

Proofing CAM to DNC to CNC Mill.

Proofing the workflow of generating a CAM project. Getting the CAM project to the DNC controller for drip feed or program download into the Fanuc OM. Testing post processor for correct operation.

Share with others!
Share on FacebookTweet about this on TwitterEmail this to someoneDigg this